Brown Annigre 974
Available Product Types
ORDER A SAMPLE
- Pattern Availability
Finish Sheet Size Min Orders Rift-Grain 4x10 1 Tru-Grain * 4x10 1 Weathered Grain 4x10 1
*Sizes and colors may vary from actual product samples depending on the equipment on which images are viewed and printed. Please view an actual product sample prior to specifying
Sizes and colors may vary from actual product samples depending on the equipment on which images are viewed and printed. Please view an actual product sample prior to specifying.
IMPORTANT NOTE: Availability is subject to change without notice. Availability is subject to change without notice.
- Warranty Info
- Care & Maintenance
Laminart®, Inc. Limited
Laminart®, Inc. expressly warrants that its products are free of defects in material and workmanship, are of merchantable quality, and meet or exceed performance standards for high-pressure decorative laminates as established by NEMA, LD 3-2005. Please note that some of our products contain special pearlized inks and do not meet NEMA standards for abrasion/scratch resistance in all finishes. Inasmuch as Laminart has no control over the end products fabricated with the materials sold, no warranty or guarantee is expressed or implied, other than those set forth above, and is limited to the replacement cost of the material alone.
Questions? Email or call Customer Service 1-800-323-7624
Metal Art™ should be cleaned with a damp cloth and gentle, rubbing motion. The cloth should be soft and clean and microfiber is preferred. Paper towels are not recommended since they may be abrasive. If necessary, ordinary soap or household cleaner may be used for more difficult stains. Avoid abrasive cleaning products, solvents, polish or scrapers. For post fabrication stain removal, it is recommended that the cleanser be tested first in an inconspicuous area.
- Slicing Method : Quarter Cut
- Matching Pattern : Slip Matched
- Matching edgebanding is available for all Veneer-Art items
(.98" x 120", .027" thickness)
|Vertical use only||No|