Golden Satinwood 3020
Available Product Types
ORDER A SAMPLE
- Pattern Availability
Finish Sheet Size Min Orders Fine Grain * 4x8 4x10
THIS PATTERN IS A PART OF THE LAMINART'S NON-STANDARD DESIGN LINE AND REQUIRES A FACTORY ORDER. STANDARD LEAD TIME IS 3 WEEKS.**
Finish Sheet Size Min Orders Gloss 4x8 4x10
1 Supermatte 4x8 4x10
1 Textured 4x8 4x10
1 Vellum 4x8 4x10
**Factory Order design, samples may be available by calling our toll-free-hotline 800-323-7624
Sizes and colors may vary from actual product samples depending on the equipment on which images are viewed and printed. Please view an actual product sample prior to specifying
Sizes and colors may vary from actual product samples depending on the equipment on which images are viewed and printed. Please view an actual product sample prior to specifying.
IMPORTANT NOTE: Availability is subject to change without notice. Availability is subject to change without notice.
- Warranty Info
- Care & Maintenance
Laminart®, Inc. Limited
Laminart®, Inc. expressly warrants that its products are free of defects in material and workmanship, are of merchantable quality, and meet or exceed performance standards for high-pressure decorative laminates as established by NEMA, LD 3-2005. Please note that some of our products contain special pearlized inks and do not meet NEMA standards for abrasion/scratch resistance in all finishes. Inasmuch as Laminart has no control over the end products fabricated with the materials sold, no warranty or guarantee is expressed or implied, other than those set forth above, and is limited to the replacement cost of the material alone.
Questions? Email or call Customer Service 1-800-323-7624
Veneer Art® general purpose high-pressure decorative laminate may be cleaned with a damp cloth, warm water, and a mild soap or household cleaning products. Cleansers that contain abrasives, acids, or alkalis may damage the decorative surface and are not recommended. Stubborn stains may require the use of hypochlorite bleach followed by a clean water rinse.
Not all finishes available in all types. Check Pattern Availability below for specifics.
A subdued wood finish with low reflective properties featuring a vertical graining with a subtle pore structure. (LRV 9.0)
A smooth, mirror-like finish suitable for applications where high reflectivity is desired. (LRV100.0) Recommended for vertical / low wear applications.
A textured laminate with low-reflective properties. (LRV 2.0)
A non-directional matte finish with moderate reflective qualities. (LRV 10.0)
A parchment like, matte finish, that is soft to the touch. (LRV 12-16)