• Home
  • Grades and Sizes
 

Laminart high-pressure decorative laminate is available for specification in the following grades (thicknesses):

GP48 [Standard Grade]: (thickness: .048”/1.2mm) The most commonly used grade; recommended for both horizontal and vertical applications where maximum impact resistance and durability are required. Standard Grade material can be cold bent to a radius no smaller than 12”. Standard Grade can be formed with heat to a radius of 4”.

GP28 [Vertical Grade]: (thickness: .028”/0.7mm) Suitable for both horizontal and vertical applications where the economies of a thinner material are desirable and impact-resistance is not as critical. The surface durability of Vertical Grade material is the same as thicker grades. Vertical Grade material can be cold bent to a radius no smaller than 7”and formed with heat to a radius no smaller than 5/8”.

Due to their physical characteristics, we do not recommend forming Pearlescence with heat regardless of grade.

GP40 [Veneer-Art Grade]: (thickness: .040”/1.0mm) This is the standard grade for our Veneer-Art line of high-performance wood veneers. It is suitable for both horizontal and vertical applications where maximum impact resistance and durability are desired.

Laminart decorative laminates are available in the following sheet sizes. Please note other sheet sizes may be available upon request.

4’ x 8’
4’ x 10’