• Home
  • Grades and Sizes
 

Lamin-Art high-pressure decorative laminate is available for specification in the following grades (thicknesses):

GP48 [Standard Grade]: (thickness: .048”/1.2mm) The most commonly used grade; recommended for both horizontal and vertical applications where maximum impact resistance and durability are required. Standard Grade material can be cold bent to a radius no smaller than 12”. Standard Grade can be formed with heat to a radius of 4”.

GP28 [Vertical Grade]: (thickness: .028”/0.7mm) Suitable for both horizontal and vertical applications where the economies of a thinner material are desirable and impact-resistance is not as critical. The surface durability of Vertical Grade material is the same as thicker grades. Vertical Grade material can be cold bent to a radius no smaller than 7”and formed with heat to a radius no smaller than 5/8”.

Due to their physical characteristics, we do not recommend forming Pearlescence and Signature Collection items with heat regardless of grade.

Note: Many Lamin-Art items are also available in a post-forming grade (.028” thickness). Post-forming grades are manufactured using a different kraft paper and resins than our standard laminates to achieve a pliable sheet that can be heated and formed to a radius smaller than 5/8”. Click here for more information.

GP40 [Veneer-Art Grade]: (thickness: .040”/1.0mm) This is the standard grade for our Veneer-Art line of high-performance wood veneers. It is suitable for both horizontal and vertical applications where maximum impact resistance and durability are desired.

Lamin-Art decorative laminates are available in the following sheet sizes. Please note other sheet sizes may be available upon request.

4’ x 8’
4’ x 10’