Metal-Art Impressions is a distinctive collection of 28 metallic surfaces that feature geometric patterns and multiple industrial colorations. Our exclusive liquid-like Glazed finish and highly reflective Mirror finish add an element of luxury and sophistication to the collection.
The three-dimensional texture is achieved by using hand-carved embossing plates to hot-press a sheet of real metal onto impregnated kraft paper. The result is a dimensional, proportionally scaled pattern that enhances architectural detail and the reflective quality of real metal.
Achieve the beauty of metal with the ease of application of a decorative laminate. Metal-Art Impressions can be installed using the same tools, substrates and adhesives as high-pressure decorative laminate.
We invite you to explore these new decorative surface options now.
Lamin-Art's Metal-Art Classics is a collection of timeless brushed metals in four elegant colorations.
A dynamic surface of linear three-dimensionality offering an illusion of spontaneous movement.
METAL-ART IMPRESSIONS FINISHES
Glazed An exclusive, liquid-like metal finish.
A highly reflective finish.
GRADE/SHEET SIZES Grade: Vertical GP28; Metal-Art™ is recommended for vertical and non-working interior applications only. Sheet Size: 4’ x 10’ (1270mm x 3050mm) Sheet Thickness: 0.038"± 0.0015" (0.97mm ± 0.038mm)
FINISHES Metal-Art Impressions is available in two finishes: 1. Glazed - An exclusive, liquid-like metal finish. 2. Mirror - A highly reflective finish.
Metal-Art Classics is available in a brushed metal finish.
METAL-ART DOES NOT MEET NEMA STANDARDS FOR ABRASION/SCRATCH RESISTANCE.
Metal-Art™ is intended for vertical, non-working applications in commercial interiors and is well suited for applications in hospitality, healthcare, retail, corporate and educational environments, and more. Metal-Art™ is for interior use only and is not recommended for direct application to plaster, gypsum wallboard, or concrete. Do not use in areas exposed to temperatures in excess of 275°F (135°C).
Metal-Art™ is manufactured by laminating phenolic resin-impregnated kraft sheets with an aluminum foil and an epoxy varnish protective layer, making Metal-Art™ ideal for a wide range of applications, similar to those where vertical grade high-pressure laminate would be suitable.
No urea formaldehyde glue used in the production process. No recycled materials used in the production process. Recyclability of product is unknown.
Metal-Art™ should be cleaned with a damp cloth in a gentle, rubbing motion. The cloth should be soft and clean; microfiber is preferred, as some paper towels may
be abrasive. If necessary, ordinary soap or household cleaner may be used for more difficult stains. Avoid abrasive cleaning products, solvents, polish or scrapers. For post fabrication stain removal, it is recommended that the cleanser be tested in an inconspicuous area.
Lamin-Art®, Inc. expressly warrants that its products are free of defects in material and workmanship, are of merchantable quality, and meet or exceed performance standards for high-pressure decorative laminates as established by NEMA, LD 3-2005. Please note that some of our products contain special pearlized inks and do not meet NEMA standards for abrasion/scratch resistance in all finishes. In as much as Lamin-Art has no control over the end products fabricated with the materials sold, no warranty or guarantee is expressed or implied, other than those set forth above, and is limited to the replacement cost of the material alone.
For information regarding product data sheets, installation guides, fire ratings, product certifications, and more please visit our RESOURCES PAGE or call Customer Service at 800.323.7624.